What Causes Black Streaks on Roofs and How to Wash Them
If you have noticed dark, unsightly streaks running down your roof, you are not alone. Across Perth, black and grey staining is one of the most common cosmetic complaints for homeowners with tiled, Colorbond and concrete roofing. These streaks are more than an eyesore. Left untreated, they can shorten the life of your roofing materials, reduce your home's street appeal and affect its resale value. This guide explains what causes the streaks, why Perth conditions make them worse and how to clean them safely and effectively in 2026.
What Are Those Black Streaks on Your Roof?
In most cases, black streaks are not dirt or soot. They are living organisms. The most common culprit worldwide is a type of cyanobacteria, often identified as Gloeocapsa magma, which feeds on the limestone filler found in many roofing materials. The bacteria produce a dark protective sheath that shields them from ultraviolet light, and this sheath is what creates the black or charcoal appearance.
Other organisms often appear alongside or instead of cyanobacteria:
- Algae: Usually appears as green, brown or black patches, particularly on shaded sections of the roof.
- Moss: Forms thick, spongy green clumps that trap moisture against roof tiles and can lift edges over time.
- Lichen: A combination of fungus and algae that grows as flat, crusty orange, grey or green patches and clings tightly to the surface.
- Mould and mildew: Often grows in damp, shaded areas and appears as dark spots or speckled discolouration.
Why Streaks Form in Streak Patterns
The characteristic vertical streaking occurs because spores are carried onto the roof by wind, birds and rain. Once they settle, they colonise the surface and spread downward as rainwater washes them along the slope. This is why streaks often appear to run from the ridge toward the gutters, and why the staining tends to be more severe on roof sections that stay damp for longer.
Why Perth Roofs Are Susceptible
Perth is known for its sunny climate, yet its roofs are far from immune to biological growth. Several local factors contribute:
Winter Moisture and Humidity
Perth receives most of its rainfall between May and September. Combined with cool nights and morning dew, this gives spores the moisture they need to establish themselves. Once growth begins in winter, it can spread significantly before the dry summer months slow it down.
Shade From Trees and Neighbouring Buildings
Southern roof faces receive less direct sunlight and stay damp for longer. Overhanging trees, including jacarandas, eucalypts and figs, also drop leaves and debris that hold moisture against the roof surface and provide nutrients for growth.
Roof Material and Age
Concrete tiles are porous and can hold moisture, which makes them particularly prone to algae and lichen. Terracotta tiles can also develop growth, especially once their glaze weathers. Older roofs with worn surfaces offer more places for organisms to cling. Metal roofing is less porous but can still show streaking in shaded or poorly drained areas.
Coastal Proximity and Airborne Particles
Homes in coastal suburbs deal with salt-laden air, while those near busy roads or industrial areas collect airborne pollutants. Dust and organic particles settle on roofs and provide a food source for growth.
Are Black Streaks Harmful?
Black streaks are primarily a cosmetic issue at first, but long-term neglect can lead to real problems:
- Surface deterioration: Moss and lichen hold moisture against tiles, which can accelerate wear and erode protective coatings.
- Heat absorption: Dark streaks absorb more heat than clean surfaces, which can slightly increase roof temperatures in summer.
- Blocked drainage: Detached moss and debris can wash into gutters and downpipes, causing blockages.
- Reduced property appeal: A stained roof can make a home look neglected, which can affect buyer perception.
- Slip hazards: Biological growth makes roof surfaces slippery, which is a danger for anyone working on the roof.
How to Wash Black Streaks Off Your Roof
Roof cleaning needs the right method for the roofing material. The wrong approach can damage tiles, strip protective coatings or void warranties. The following outlines the typical professional process.
Step 1: Safety and Inspection
Roofs are hazardous work environments. Falls from roofs are a leading cause of serious injury in Australian homes, and wet algae-covered surfaces are extremely slippery. Cleaning should only be done with appropriate fall protection, and for most homeowners, hiring a qualified roof cleaning professional is the safest option. An inspection before cleaning identifies cracked, loose or broken tiles, failed pointing and other issues that should be repaired first.
Step 2: Protect the Surroundings
Plants, outdoor furniture, vehicles and solar panels should be protected or moved. Downpipes are typically disconnected from stormwater or blocked off so that wash water and debris do not enter the drainage system.

Step 3: Choose the Right Cleaning Method
There are two main approaches to cleaning a roof:
- Low-pressure soft washing: Uses a biodegradable or specially formulated biocide, often a diluted sodium hypochlorite-based solution, applied at low pressure. The treatment kills the organisms at the root, so staining is lifted and regrowth is slowed. This is generally the preferred method for older, porous or delicate roofs.
- High-pressure washing: Uses pressurised water to blast away growth. It can be effective on robust concrete or terracotta tiles when done by a skilled operator, but too much pressure can strip tile glazing, damage surface coatings, force water under tiles and wear away the roof's protective layer.
Step 4: Apply Treatment and Allow Dwell Time
The cleaning solution is applied evenly across the roof and left to work for the recommended period. This dwell time allows the product to penetrate and kill the growth rather than simply removing the surface layer. Many streaks begin to fade within hours, though full results can take a few weeks as rain gradually washes away remaining dead material.
Step 5: Rinse Thoroughly
After treatment, the roof is rinsed with clean water, working from the ridge down to the gutters. Gutters are then cleared of any debris that has been dislodged.
Step 6: Consider a Protective Sealant
After cleaning, some homeowners choose to apply a roof sealant or coating, particularly on concrete tiles. A quality sealant can reduce porosity, improve water runoff and help prevent regrowth. A fungicide or anti-mould treatment may also be applied to extend the clean appearance.
DIY Roof Cleaning: What to Know
While some homeowners consider cleaning their own roof, there are important risks and limitations to consider:
- Safety risk: Working at height without proper equipment is dangerous, and wet roofs are especially slippery.
- Risk of damage: Stepping on tiles can crack them, and incorrect pressure settings can damage the surface.
- Chemical handling: Biocides and chlorine-based products must be handled carefully and kept away from plants, pets, waterways and stormwater drains.
- Environmental rules: Wash water should not be allowed to enter stormwater drains, which flow untreated into Perth's rivers and wetlands, including the Swan and Canning river systems.
- Incomplete results: Surface scrubbing without proper treatment often leaves roots behind, allowing quick regrowth.
How to Prevent Black Streaks From Returning
No roof can be made permanently immune to growth, but you can slow its return significantly:
Trim Overhanging Branches
Pruning back trees increases sunlight and airflow, helping the roof dry faster after rain and reducing leaf litter on the surface.
Keep Gutters Clean
Blocked gutters hold water, which can back up onto roof edges and create ideal conditions for growth. Regular gutter cleaning, especially before winter, helps keep drainage flowing.
Remove Debris Regularly
Leaves, twigs and dust should be cleared from the roof and valleys, as they trap moisture and feed https://housewashingperth.com.au/graffiti-removal/ organisms.
Schedule Regular Maintenance
In Perth, a roof clean every two to four years is typical, though this varies depending on shade, tree cover, roof material and proximity to the coast. Regular inspections help catch early growth before it spreads.
Consider Zinc or Copper Strips
Metal strips installed near the ridge release trace metal ions when it rains, which can inhibit algae growth on the roof below. They work best as a preventative measure on a freshly cleaned roof.
Choosing a Roof Cleaning Professional in Perth
When hiring a roof cleaner, look for a provider that:
- Holds current public liability insurance and uses proper fall protection.
- Inspects the roof and recommends a method suited to your roofing material.
- Uses environmentally responsible practices and captures or manages wash water appropriately.
- Provides a clear, written quote that outlines the scope of work.
- Can identify and report on broken tiles or other issues discovered during cleaning.
Final Thoughts
Black streaks on roofs are caused mainly by cyanobacteria and other algae, helped along by Perth's wet winters, shaded roof sections and porous roofing materials. While they start as a cosmetic problem, ongoing growth can hasten roof wear and reduce your home's value. The best approach is a professional low-pressure soft wash that kills growth at its source, followed by sensible prevention such as tree trimming, gutter maintenance and regular inspections. With the right care, a Perth roof can stay clean, protected and looking its best for many years.

House Washing Perth
(08) 7828 5551